Yaesu FT1000 Mark-V

NOK15.000,00

Meget pen, velfungerende og lytefri.

Yaesu FT 1000 Mark-V 200W

Org emb. Mikr. og manualer

FT-1000MP Mark V Specifications

GENERAL	0
RX Frequency Range:	100 kHz ~ 30 MHz
TX Frequency Ranges:	160 ~ 10 m (Amateur bands only)
Frequency Stability:	±0.5 ppm (after 1 min. @ 25 °C)
0	±0.25 ppm (after 1 min. @ 25 °C, w/TCXO-6)
Operating Temperature Range:	-10 °C ~ +50 °C
Emission Modes:	LSB, USB, CW, FSK, AFSK, AM, FM
Frequency Steps:	0.625/1.25/2.5/5/10 Hz for SSB,CW, RTTY & Packet
0	100 Hz for AM and FM
Antenna Impedance:	16.6 ~ 150 Ohms, unbalanced (Tuner ON, TX only)

Supply Voltage:	30 VDC and 13.8 VDC (FP-29)
Dimensions (WHD):	16" x 5.3" x 13.7" (410 x 135 x 347 mm)
Weight (approx.):	31 lbs. (14 kg.)
0
TRANSMITTER	0
Power Output:	Adjustable up to 200 watts (50 watts AM carrier),
Class A mode (SSB):	75 watts maximum
Duty Cycle :	100% @ 100 watts,
0	50% @ 200 watts (FM & RTTY, 3-minute TX)
Modulation Types : SSB:	J3E Balanced,
AM:	A3E Low-level (early stage),
FM:	F3E Variable reactance,
AFSK:	J1D, J2D Audio frequency shift keying
Maximum FM Deviation:	±2.5 kHz
FSK Shift Frequencies:	170, 425 and 850 Hz
Packet Shift Frequencies:	200 and 1000 Hz
Harmonic Radiation:	Better than -60 dB (Typical)
SSB Carrier Suppression:	At least 40 dB below peak output
Undesired Sideband Suppression:	At least 55 dB below peak output
Audio Response (SSB):	Not more than -6 dB from 400 to 2600 Hz
3rd-order IMD:	- 31 dB @ 200 watts PEP, or better
0	(Class A mode) - 50 dB @ 75 watts PEP (Typical)
Microphone Impedance:	500 to 600 Ohms
0
RECEIVER	0
Circuit Type:	Quad-conversion superheterodyne (triple conversion for FM)
Intermediate Frequencies:	0
Main RX:	70.455 MHz/8.215 MHz/455 kHz,
Sub RX:	47.21 MHz/455 kHz

Sensitivity :
Modes	0.5 - 1.8 MHz	1.8 - 30 MHz
SSB/CW (2.0 kHz)	2 uV	0.16 uV
AM (6 kHz)	13 uV	2 uV
FM	-	0.5 uV
(with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD, 0 dB u = 1 uV)

IF Rejection (1.8 ~ 30 MHz):	80 dB or better (Main RX), 60 dB or better (Sub Rx)
Image Rejection (1.8 ~ 30 MHz):	80 dB or better (Main), 50 dB or better (Sub)
Maximum Audio Output:	2.0 W into 4 Ohms with <10 % THD
Audio Output Impedance:	4 to 8 Ohms
0
FP-29 Specifications	0
DC Output Voltage/Current:	+30 V: 15 A; +13.8 V: 3 A
Input Voltage:	AC 100-120 V, 50-60 Hz
0	AC 200-240 V, 50-60 Hz
Current Consumption (Approx.):	AC 100-120 V: 9 A, AC 200-240 V: 5 A
Operating Temperature Range:	-10°C ~ +50°C
Case Size (W x H x D):	4.2"x 5.3"x 13" (106 x 135.5 x 331 mm)
Weight (Approx.):	7 lbs.(3.2 kg.)
0
Specifications are subject to change, in the interest of technical improvement, without notice or obligation.